301.519.9237

L1-05A.02 – Digital Communicators

L1-05A.02 – Digital Communicators Lesson 5A – Communications Texas Level 1 Digital Communicators are used to transmit a signal from the alarm site over regular landline telephone wires (POTS = plain old telephone service) to an alarm monitoring station The...

L1-04E.04 – Connect the RJ31 X

L1-04E.04 – Connect the RJ31 X Lesson 4E – Wiring the Control Texas Level 1 Check the instructions for the proper order of connecting devices. Note: you may use an RJ31x cord with a landline, cell phone or other communications...

L1-04E.03 Connect the Power

L1-04E.03 Connect the Power Lesson 4E – Wiring the Control Texas Level 1 Check the instructions for the proper order of connecting devices. Some panels will only startup correctly if the transformer is powered up first.  Others need the battery connected...

L1-04E.02 Connect the Sensors

L1-04E.02 Connect the Sensors Lesson 4E – Wiring the Control Texas Level 1 Make sure you wire the sensor to match how you program the zone. If you programmed the zone to alarm when the circuit closes make sure you wire the sensor so that it normally keeps the...

L1-04D.34 – Record All Changes

L1-04D.34 – Record All Changes Lesson 4C – Configure & Program Texas Level 1 Make sure that all documentation is updated when you make a...